DIY Town Water – Alternative options for Inlet

<<< Installing a Town Water Inlet


Our article about installing a town water inlet suggests fitting a  Shurflo Water Inlet in the wall of the van. This fitting includes a built-in pressure reduction valve.

If you aren’t so keen on cutting a hole in your van to fit the Shurflo Inlet, or there is no suitable space available on your van wall, it is possible to fit a town water inlet below the vehicle, as shown in the pics below (in these examples, alongside a grey water waste outlet).

Water Inlet under vehicle

Keep in mind though that you should also fit a pressure reduction valve behind this inlet, as discussed in the main article.


<<< Back to Installing a Town Water Inlet